eDNA Scat Kit Instructions

This protocol is designed for scat sample collection using an EnviroDNA eDNA kit. To ensure the best results, familiarise yourself with our instructions before your sampling survey. More information on tips for avoiding contamination and other sampling considerations are found here. Once sampling is complete, return your samples safely to our laboratory for analysis.

Kit Contents

Sample kit with data label
Gloves
Preservation buffer
Swab

Protocol

Step 1 – Put on gloves

Open the sampling kit and put on the provided gloves.

Step 2 - Label the sample

Clearly write the site, date, and GPS coordinates on the sample.

Step 3 – Prepare swab

Prepare the swab
Open the preservative and pre-wet the swab with the preservation buffer before sampling.

Step 4 – Swab scat

Swab scat lengthways 6-10 times, then break open scat and swab 6-10 times.
Rotate swab so all sides are exposed.

Step 5 – Snap swab to fit

Snap the swab stick to a length that allows it to fit comfortably inside the preservative tube before replacing the cap.

Step 6 - Secure and repeat

Firmly tighten the preservative cap.
Repeat the sampling process if additional replicate samples or swabs are required.

Step 7 – Label samples

Place the samples into the kit.
Fill out the site label, ensuring all details are complete: site, date, and GPS coordinates.

Step 8 – Send samples

Once replicates and sampling is complete, send to EnviroDNA: Level 1, 95 Albert Street, Brunswick VIC 3056